|
PV500 Vacuum Specifications |
| Air Consumption |
500 C.F.M @ 100 P.S.I |
| Vacuum Loading rate |
58.7 S.C.F.M @ 25 “ H.G |
| Control Power (batteries) |
12 Volt D.C |
| Operator Controls (Man/Auto Vacuum/Discharge) |
Also Reverse Vacuum NEW! |
| Height |
77” |
| Width |
36” |
| Length |
70” |
| Vacuum Inlet |
4” Cam Lock |
| Discharge Outlet |
4” Victaulic |
| Air Inlet |
2” N.P.T |
| Pressure Vessel |
Certified |
| Weight |
1800 LBS |
- Skid Mounted c/w forklift lift points
- The PV500 Vacuum unit cycles from vacuum to discharge when the pressure vessel is filled with the material being vacuumed. This is set by the operator on a timer located in the control box. Overfilling will not damage the unit.
- Material being vacuumed does not come in contact with any moving parts.
- Handles wet or dry material, sludges, slurries, sand, gravel, and rock.
- Batteries are good for approximately one-month continuous operation before recharge.
- Virtually maintenance free as there are only three moving parts (knife, gate, valves).
- There are no filters to clean or replace.
|
